If you’ve ever wondered why your light bulbs keep going out, you’re not the only one. Many people experience this frustrating problem, and there can be several reasons for it. When light bulbs burn out, it isn’t very pleasant since you need to get new bulbs and invest again. Many people have this question: why do light bulbs burn out so quickly even if they are not used often? Most of them think it is just the quality of the bulbs, but remember that there is more to it. Your light bulbs may be burning out for a number of reasons. We’ll look at some of the most typical reasons why light bulbs burn out in this post, along with some preventative measures.
There are several factors that the article explores impacting the life of light bulbs. By addressing the issues, you can ensure that light bulbs keep your home bright and well-lit for a considerable period of time.
Their poor quality represents one of the more frequent causes of light bulbs burning out too soon. Cheaply made bulbs often have thinner filaments, making them more likely to break or burn out. You’ll probably need to swap out bulbs with greater regularity if you choose inexpensive ones. It is among the most prevalent causes. But there might be other explanations as well. If you get good quality bulbs and they still burn out, there must be some other reason.
Also read about Most Common Light Switch Problems
When using bulbs with a wattage that is excessive for the light fixture, bulbs may burn out faster than normal. The higher wattage generates more heat, which can damage the bulb. It is your responsibility to check the wattage and get the bulbs accordingly. You can’t blame the bulb if you use high-wattage bulbs in low-wattage light fixtures. It is where there is no fault on the part of the manufacturer or the seller. Check the wattage recommendations for your fixture and ensure you use bulbs that fall within the recommended range.
The bulb may burn out swiftly if the connections between it and the fixture are shoddy. Make that the links are clean and corrosion-free and that the bulb is securely fastened. If you do this part, you will notice that your bulbs are lasting longer. This reason is not very common. People do not know how loose connections cause the bulbs to burn out. Again, there is no fault on the part of the manufacturer or the seller but the one installing the bulb.
Voltage fluctuations in your home’s electrical system can cause bulbs to burn out more quickly. It can happen when the voltage is too high or too low. If you suspect voltage fluctuations are causing your bulbs to burn out, you may need electrician services in Kalamazoo to inspect your electrical system. Voltage fluctuation is a common issue faced by a lot of people. Even high-quality bulbs burn out of the voltage fluctuates. In this circumstance, you have no choice except to hire an electrician to inspect your electrical system.
While using a lamp with a shade, make sure the shade is the right size and shape for the bulb. A small shade may result in the bulb overheating and burning out. If the shade is too large, it can cause the bulb to burn out prematurely because it’s not getting enough ventilation. Most people do not consider this issue. They might not know. The size of the lamp shades is not considered when buying a bulb. It makes the bulb burn out quickly, so it is better to consider the lamp shade size rather than changing the bulb often.
The bulb may burn out more rapidly if your light fixture is near something that vibrates a lot, such as a ceiling fan or a garage door opener. Make sure the fixture is securely mounted, and consider using a vibration-resistant bulb.
hire an hygrid electrical services to fix your electrical problems.
Dirt and debris can accumulate on light bulbs and fixtures over time, which can cause them to overheat and burn out more quickly. People might clean the bulbs, but very few people clean the fixtures, which causes the bulbs to burn out. Regularly cleaning your bulbs and fixtures can help prevent this.
If you frequently turn your lights on and off, it can cause the filament in the bulb to break down more quickly. To regulate the brightness of light, think about utilizing dimmer switches or bulbs made for frequent on/off cycling. This issue is very common in homes with children as they enjoy the sound while turning the bulb on or off.
If your light fixture is located in an area that gets very hot, such as near a stove or oven, it can cause the bulb to burn out more quickly. Consider using a lower-wattage bulb or a bulb designed for high-heat environments. It is a very obvious reason for burning out. It is something people should know and take care of.
Electrical surges can also cause bulbs to burn out prematurely. It may occur as a result of a lightning strike or an issue with your home’s electrical system. To help safeguard your bulbs and other electrical appliances, think about utilizing surge protectors.
In a nutshell, there are several factors why light bulbs burn rapidly, but you may assist in avoiding this by taking a few easy safeguards. Keep your bulbs and fixtures clean, and make sure you’re using high-quality bulbs with the appropriate wattage for your fixture. Consider using surge protectors and vibration-resistant bulbs, and have an electrician inspect your electrical system if you suspect that voltage fluctuations are causing your bulbs to burn out. You must have noticed that the issue is not on the part of the manufacturer except for the low-quality bulbs. Your light bulbs can operate for a greater duration if you follow a few safety measures.